RCJ 2024 - Záchranár - NLO Rescue

(ak ste prihlásení, stlačte "Upraviť" a skopírujte obsah tejto stránky na svoju stránku - okrem tohto riadku - a potom ju upravte)

naspäť na zoznam tímov RCJ 2024

NLO Rescue

School/Club: Centar izvrsnosti Varaždinske županije

Contact: jan.ridzak@gmail.com

Category: Rescue Maze Beginner

---

Previous history of the model

We first constructed a robot from just from Fischertechnik bricks. Then we started adding 3D printed parts. First, we added the motors on the 3D printed chasis. Than we added all the sensors and the TXT. Finally, we added the wheels. Than we started adding some advanced things like relays, slope detectors and the keyboards. We have been working on this robot for more than 1.5 years. We have been to the European championship with the previous version of this robot. We have a total of 9 sensors. 6 of them are used for navigating the walls, 2 are color sensors and there is the slope detector made out of a LED diode and the photosensor.

Construction and Hardware

We tried to make our hardware as durable as possible so our robot can navigate the maze with ease. These are the files we used to print the parts of our robot.

tilt_sensor

robo_postolje

kliker_sustav

Robot parts

• Fischertechnik TXT controller
• 2 18650 3.7 V Li-ion battery
• 3D printed tires
• 3D printed chasis
• 4 ML-R BDC 6V motors
• gangbei 12 V motor
• Fischertechnik photosensor
• 3 Fischertechnik ultrasonic sensors
• 2 Fischertechnik color sensors
• 2 Fischertechnik LED diode
• relay
• 3 keyboards

robot

Schematics of connecting motors and sensors to the controller

We use M ports to connects motors.

M and O

We us I and C ports to connect sensors

C

I

Software

We have made 3 different programs over the 1.5 year period, this is the best and the most advanced one. Súbor:Maze slovacka final.zip

picture of robot